ACTi A811 - Physical Description

www.acti.com
Hardware Manual
8
Physical Description
Item
Description
1
DC 12V Power
Input
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adapter (not included).
2
Ethernet Port
Connects to a network using an Ethernet cable with RJ-45
connector.
3
Reset Button
Restores the camera to its factory default settings. To reset the
camera, press and hold the Reset Button for about 15 seconds.
4
Memory Card Slot
Insert a memory card into this slot for local recording purposes.
5