EasyManuals Logo

ACTi ACM-3001 Installation

ACTi ACM-3001
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.acti.com
ACTi
Knowledge Base
Category: Installation & Configuration Note
Sub-category: Application
Model: ACM-3511/ACM-3011
Firmware: N/A
Software: N/A
Author: Victor.Wang
Published: 2009/09/02
Reviewed: 2010/01/21
1
Tips for 3-Inch Dome Installation
Contents
Introduction
Installation of camera plate
Installation of camera
Installation of front cover
Future design and improvement
Introduction
Some customers have a problem with installing a 3 inches dome. After adjusting the viewing
angle, zoom or focus, the lens part will be moved again by the rubber and black plastic cover
when they closing the dome cover. The purpose of this document is to guide customer through
the procedures of installing a 3 inches dome efficiently.
Installation of camera plate
1. Use the drill template, and drill a hole with φ 35 on the ceiling.

Other manuals for ACTi ACM-3001

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ACTi ACM-3001 and is the answer not in the manual?

ACTi ACM-3001 Specifications

General IconGeneral
BrandACTi
ModelACM-3001
CategorySecurity Camera
LanguageEnglish

Related product manuals