Hardware Manual
29
Reset the Camera
The camera has a Reset button that can be used to restore the camera to its factory default
settings when the need arises.
The Reset button is used for the following purposes:
The administrator’s password is forgotten and therefore the camera cannot be
accessed
In case of IP address, mask, or allow/deny filter related issues, resulting with the
inability to modify these settings
In case of connectivity issues or abnormal video quality
How to Reset the Camera?
Do the following procedures to access the Reset button and restore the camera its default
factory settings.
1. Remove the three (3) screws securing the integrated bracket.
2. Detach the integrated body from the camera back cover.
To Next Page
Loading...
