ACTi Q950 - Page 10

www.acti.com
Hardware Manual
10
Item
Description
13
Serial Port Connector
Connects to serial device using the RS-422 or RS-485
protocol. See Connecting Serial Devices (Optional) on
page 25 for more informatioin.
14
Digital Output
Connects to digital output devices, such as a door relay,
alarm trigger, etc. See Connecting DI/DO Devices
(Optional) on page 19 for information.
15
Network Connector
Connects to a network using an Ethernet cable.
16
Power Input
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to
an external power adapter. See Connecting a Power
Adapter (Optional) on page 18 for more information.