Encoder Hardware Manual
25
Other Accessories
How to Install / Remove the Memory Card
The encoder supports local video recording or saving of snapshots to a memory card.
NOTE: Supports microSDHC and microSDXC cards.
How to Insert the Memory Card
Insert a memory card into the card slot with the metallic contacts facing down the encoder. Push
the card until it clicks into place.
How to Remove the Memory Card
In case there is a need to remove the card, make sure to access the encoder Web Configurator to
safely “unmount” the card first (see the encoder Firmware manual for more information). Once
unmounted from the firmware, push the card to eject it from the slot.
To Next Page
Loading...