Firewall
Click General from any Firewall Settings screen to display the Firewall
screen, as shown in the figure above. To configure basic settings of the
Router’s firewall, follow the onscreen instructions.
IPv6 Firewall
Click IPv6 Firewall from any Firewall Settings screen to generate the
IPv6 Firewall screen. To set up, follow the onscreen instructions.
Port Forwarding
Click Port Forwarding from any Firewall screen to generate the Port
Forwarding screen.
Activating port forwarding allows the network to be exposed to the
Internet in certain limited and controlled ways, enabling some applications
to work from the local network (game, voice, and chat applications, for
example), as well as allowing Internet access to servers in the local
network. This screen allows you to configure the port forwarding settings
of the Router. If changes are made in this screen, click Apply at the
bottom of the screen to save them.
Port forwarding settings should only be adjusted by experienced technical
users who are extremely familiar with networking concepts.
To Next Page
Loading...
Need help?
General
