Need help?Do you have a question about the ActionTec MI424-WR and is the answer not in the manual?
General| Wireless Standards | 802.11b/g |
|---|---|
| Frequency Band | 2.4 GHz |
| Ethernet Ports | 4 x 10/100 Mbps |
| WAN Ports | 1 x 10/100 Mbps |
| Security | WEP, WPA, WPA2 |
| Weight | 0.75 lbs |
| Firewall | SPI, NAT |
Outlines the main steps for initial router setup.
Provides step-by-step instructions for connecting the router's cables.
Guides users through the initial web-based configuration of the router.
Explains how to log into the router's administrative interface.
Details how to set a new username and password for router access.
Describes the main screen of the router's control panel.
Accesses advanced configuration options for the router.
Instructions for connecting additional devices to the router.
Instructions for connecting devices via Ethernet.
Instructions for connecting devices wirelessly.
Instructions for connecting devices via coaxial cable.
Guides on configuring computer network settings.
Steps to configure Windows XP for automatic IP address acquisition.
How to navigate to the 'My Network' section of the router interface.
Displays the status of the router's network and internet connection.
Lists connected devices and their network status.
How to access and manage connected devices on the network.
Guides on setting up port forwarding for applications.
Introduces wireless networking standards and default security.
Explains wireless networking screens and properties.
Configures wireless network settings like SSID and mode.
Controls the router's wireless functionality on and off.
Shows the current status of the wireless connection.
Sets the network name for wireless connections.
Configures the wireless access point settings.
Detailed configuration for the wireless access point.
Advanced settings for wireless transmission and security.
Configures security settings for the wireless network.
Steps to configure WPA security for wireless connections.
Details on configuring 802.1X WEP security.
Accesses the router's network connection configuration screen.
Configuration for the local area network (LAN) settings.
Guides on configuring the home/office network settings.
Configures the router to act as a DHCP server.
Guides on configuring the Ethernet connection settings.
Guides on configuring the coaxial connection settings.
Guides on configuring the broadband Ethernet connection.
Guides on configuring the coaxial broadband connection.
Guides on configuring the WAN PPPoE connection.
General parameters for WAN PPPoE connection.
Configures the router's basic security settings and firewall levels.
Restricts local network access to specific internet services.
Enables internet access to specified local network services.
Designates a host to receive traffic not belonging to known sessions.
Allows viewing and setting permissions for network services.
Designates a host to receive traffic not belonging to known sessions.
Dynamically opens firewall ports based on traffic triggers.
Controls firewall behavior with specific input/output rules.
Steps to activate the parental control service.
Defines rules to block or allow specific website categories.
Common methods to regain access to a locked-out router.
Procedures to restore the router to its factory default settings.
Checks and resolves issues related to LAN connection failures.
Troubleshoots timeout errors when entering URLs or IP addresses.
Steps to change the router's administrator password.
Troubleshooting steps for MoCA internet connection issues.
Instructions on refreshing IP addresses after DHCP configuration.
Troubleshooting steps for accessing the router's GUI.
Guides on making FTP/Web servers accessible via the internet.
Manages inbound/outbound priority rules for network devices.
Defines rules to set traffic priority for devices.
Manages and avoids network congestion by shaping traffic.
To Next Page
