61
Chapter 5 Using Network Connections
Configuring the Coax Broadband Connection
Click Settings at the bottom of the Broadband Connection (Coax) Properties
screen to generate the “Configure Broadband Connection (Coax)” screen.
General
The top part of the screen displays general communication parameters.
Actiontec recommends not changing the default values in this section unless
familiar with networking concepts.
Status Displays the status of the connection (“Down,” “Connected,” etc.).
When should this rule occur? Displays when the rule is active. To schedule rules,
see the “Advanced Settings” chapter.
Network Displays the type of network to which the link is connected. Since this
is a broadband connection (connected to the Internet), “Broadband Connection
is displayed.
Connection Type Displays the type of connection. Since this is a coaxial connec-
tion, “Coax” is displayed.
To Next Page
Loading...
