ActionTec MI424-WR - ARP (Address Resolution Protocol) Table; Routing

126
Actiontec Wireless Broadband Router User Manual
127
Chapter 8 Using Advanced Settings
3. Select the “System” and “Security” notification levels in the “System
Notify Level” and “Security Notify Level” drop-down lists.
☞
Note: Changing any of the user parameters will prompt the con-
nection associated with the user to terminate. For changes to
take effect, activate the connection manually after modifying user
parameters.
ARP (Address Resolution Protocol) Table
Clicking ARP Table in the Advanced screen generates the “ARP Table” screen. This
screen displays the IP and MAC addresses of each DHCP connection.
Routing
Access the routing table rules by clicking Routing in the Advanced screen. The
“Routing” screen appears.