ActionTec MI424-WR - Restart; Restoring Default Settings

110
Actiontec Wireless Broadband Router User Manual
111
Chapter 8 Using Advanced Settings
Restart
To restart the Router:
1. Click Restart in the Advanced screen. The “Restart” screen appears.
2. Click OK to restart the Router. This may take up to one minute.
To reenter the MegaControl Panel after restarting the Router, click the web brows-
er’s “Refresh” button.
Restoring Default Settings
If the Router’s factory default settings need to be restored (to build a new network
from the beginning, for example), use the following procedure:
1. Click Restore Defaults in the Advanced screen. The “Restore Defaults” screen
appears.
2. Click OK to restore the Router’s factory default settings.
☞
Note: All of the Router’s settings and parameters will be
restored to their default values after performing the Restore
Default procedure. This includes the administrator password; a
user-specified password will no longer be valid.