ActionTec MI424-WR - Remote Administration

82
Actiontec Wireless Broadband Router User Manual
83
Chapter 6 Configuring the Router’s Security
3. Click Add. An “Edit Service” screen appears.
3. Specify the port triggering entries by clicking New Trigger Ports and New
Opened Ports and entering the protocol and protocol number in the suc-
ceeding screens. For example, to set up port triggering for the scenario laid
out on the previous page, the service ports would be set to UDP and 2222,
while the opened ports would be set to UDP and 3333.
Remote Administration
The Router can be accessed and controlled not only from within the local network,
but also from the Internet using remote adminstration.
To access, select Remote Administration from the left side of any Security screen.
The “Remote Administration” screen appears.