ActionTec MI424-WR - Allow or Restrict Services

76
Actiontec Wireless Broadband Router User Manual
77
Chapter 6 Configuring the Router’s Security
Allow or Restrict Services
To view and allow/restrict these services:
1. Select Access Control from the left side of any Security screen. The “Access
Control” screen appears.
☞
Note: The “Allowed” section is only visible when the firewall is
set to “Maximum.”
2. Click Add. The “Add Access Control Rule” screen appears.
☞
Note: To block a service, click Add in the “Blocked” section of
the Access Control screen. To allow outgoing traffic, click Add
in the “Allowed” section of the screen.