ActionTec MI424-WR - Configuring the WAN PPPoE Connection; General

66
Actiontec Wireless Broadband Router User Manual
67
Chapter 5 Using Network Connections
Configuring the WAN PPPoE Connection
Click Settings in the WAN PPPoE Properties screen to generate the “Configure
WAN PPPoE” screen.
General
The top part of the Configure WAN PPPoE screen displays general communica-
tion parameters. Actiontec recommends not changing the default values in this
section unless familiar with networking concepts.
Status Displays the connection status of the WAN PPPoE connection. (“Down,”
“Disabled,” “Connected,” etc.)