ActionTec C3000A User Manual

30
C3000A 802.11n and 802.11ac Wi-Fi Router
How to Set the T3200 to RFC1483 Transparent Bridge
From the WAN IP Address screen, select RFC 1483 Transparent
Bridging and click Apply. The Router will allow the WAN IP address to
pass-through to the device connected to LAN Port 1 Only.
IPv6 LAN Settings
Click IPv6 LAN Settings from any Advanced Setup screen to generate
the IPv6 LAN Settings screen. This feature allows the user to set the IPv6
LAN IP settings on the Router. Follow the onscreen instructions to
configure.
DHCP Reservation
Click DHCP Reservation from any Advanced Setup screen to
generate the DHCP Reservation screen. This feature allows the user to
lease a permanent DHCP-allocated address to a client on the Router’s
network. Follow the onscreen instructions to configure.
Dynamic DNS
Click Dynamic DNS from any Advanced Setup screen to generate the
Dynamic DNS screen. This feature allows the user to associate the WAN
IP address of the Router with a host name. Follow the onscreen
instructions to configure.

ActionTec C3000A Specifications

General

Brand	ActionTec
Model	C3000A
Category	Wireless Router
Language	English