ActionTec C3000A User Manual

8
Introduction
WAN Ethernet Port
The WAN Ethernet port is used to connect the Router to a WAN
connection via an Ethernet cable.
LAN Ethernet Ports (4)
The LAN Ethernet ports are used to connect computers to the Router
via Ethernet cable. The Ethernet ports are 10/100/1000 Mbps auto-
sensing ports, and either a straight-through or crossover Ethernet cable
can be used when connecting to the ports.
USB Port
The USB port is used to connect the Router to a USB device.
DSL Port (Single & Bonded)
The DSL port is used to connect the Router to a DSL wall outlet via
DSL cable.

ActionTec C3000A Specifications

General

Brand	ActionTec
Model	C3000A
Category	Wireless Router
Language	English