ActionTec T3200M - Before You Get Started

Before you get started
Confirm your TV has an available HDMI input:
Your kit includes an HDMI cable to connect your
wireless digital box to an HDMI input on your TV
(typically found on the back of the TV). If your TV
doesn’t have an available HDMI input, you’ll need
to use Component Audio and Video cables
instead (not included).
Identify your TELUS gateway/modem:
You will already have a gateway/modem installed in your home.
This would have been set up when you first received TELUS Internet.
To determine the model of your gateway/modem, check the sticker
on the device. If you have a T3200M, you will need to pair your wireless
digital box with your gateway/modem in Step 2. If you do not have this
model, you will need to identify your wireless access point (details below).
1
Identify your wireless access point (if applicable):
If you do not have an Actiontec T3200M, you will have a wireless
access point installed in your home. Locate this piece of equipment
and ensure that it is connected to your gateway/modem.
For a detailed visual reference of the equipment,
please visit telus.com/selnstall
Wireless access point
Actiontec T3200M
Pb Y AUDIO
OUT
VIDEO
OUT
HDMI OPTICAL POWER
Pr
NETWORK
HDMI output
ACCESS
POINT
POWER
WPS
PAIRED
LINK