Need help?Do you have a question about the ActionTec PK-5000 and is the answer not in the manual?
Lists hardware and software needed for operation.
Details the capabilities and compliance standards of the gateway.
Describes the indicator lights, buttons, and their functions.
Details the ports, reset switch, and power controls.
Steps to launch the web-based configuration screens.
Covers login, ISP connection type, and IP settings.
Guide to setting the admin username and password.
Information on DSL and PPP connection states.
Access to NAT and Routing tables for network analysis.
Overview of connected devices and their network status.
Instructions to navigate to wireless settings.
Setting up SSID, channel, and WEP encryption.
Configuration of WPA, WEP+, MAC Auth, and WPS.
Steps to enter the advanced configuration section.
Configuring WAN/LAN IPs, DHCP server, and DSL parameters.
Setup for Quality of Service, routing protocols, UPnP, etc.
Instructions to navigate to security settings.
Setting firewall security from High to Off.
Managing applications, DMZ, NAT, and port mapping.
Steps to enter the parental control interface.
Blocking services, websites, and setting schedules.
Steps to enter the utilities configuration screens.
Restoring defaults, firmware upgrades, rebooting, and testing.
Technical specifications for hardware, protocols, and environment.
Compliance, FCC, and essential safety guidelines.
To Next Page
General
