ActionTec PK-5000 - Dynamic Routing; Static Routing

43
Chapter 5 Configuring Advanced Settings
Dynamic Routing
Selecting Dynamic RoutingINTHEh!DVANCED3ETUPvSCREENGENERATESTHE
“Dynamic RoutingvSCREEN
If another gateway or router is set up behind the Gateway in the network configu-
ration, consult the documentation that came with the other gateway to see what
kind of Dynamic Routing is required, then select the needed option.
When finished in this screen, click Apply to activate any changes made.
Static Routing
Selecting Static RoutingINTHEh!DVANCED3ETUPvSCREENGENERATESTHEh3TATIC
2OUTINGvSCREEN%NTERTHESTATICROUTEADDRESSESINTHEIRRESPECTIVETEXTBOXES
then click Add4HEADDRESSWILLAPPEARINTHEh3TATIC2OUTING4ABLEv4OREMOVE
an address, highlight it by clicking on it in the Static Routing Table, then click
Remove.
When finished in this screen, click Apply to activate any changes made.