ActionTec PK-5000 - Upnp (Universal Plug and Play); USB Port Detection

44
Wireless DSL Gateway User Manual
UPnP (Universal Plug and Play)
Selecting UPnPINTHEh!DVANCED3ETUPvSCREENGENERATESTHEhUPnPvSCREEN)N
this screen, the Universal Plug and Play option is turned on or off by activating the
appropriate circle.
Universal Plug and Play is a zero-configuration networking protocol that allows
hardware and software (such as Netmeeting) to operate more efficiently. If
Netmeeting is not running properly, activate UPnP.
!
Note!CTIVATINGUPnPPRESENTSASLIGHTSECURITYRISK!FTER
finishing with the hardware or software using UPnP, we recom-
mend deactivating UPnP.
When finished in this screen, click Apply to activate any changes made.
USB Port Detection
Selecting USB Port DetectionINTHEh!DVANCED3ETUPvSCREENGENERATESTHEhUSB
0ORT$ETECTIONvSCREEN)NTHISSCREENTHEUSB port detection option is turned on or
OFFBYACTIVATINGTHEAPPROPRIATECIRCLEDEFAULTISh/FFv)FTHISOPTIONISTURNEDON
the USB port will be disabled if an Ethernet cable is plugged into the Gateway first, or
the Ethernet port will be disabled if the a USB cable is plugged into the Gateway first.
If this option is turned on when both an Ethernet and a USB cable are plugged into
the Gateway, the USB port will be disabled.
When finished in this screen, click Apply to activate any changes made.