ActionTec PK-5000 - WAN IP Address

35
Chapter 5 Configuring Advanced Settings
The values in the “Modem IP!DDRESSvANDh-ODEM3UBNET-ASKvTEXTBOXESARE
the IP and subnet mask address of the Gateway as seen on the network. These val-
ues can be modified for your ,!.network, but we recommend keeping the default
factory settings (IP address 192.168.1.1; subnet mask address 255.255.255.0).
!
Note: If the Gateway’s ,!.)0!DDRESSISMODIFIEDVERIFYTHE
$(#03ERVERRANGEISWITHINTHESAMESUBNET&ORMOREINFOR-
mation, see “$(#03ERVER#ONFIGURATIONv
When finished in this screen, click Apply to activate any changes made.
WAN IP Address
Selecting WAN IP AddressINTHEh!DVANCED3ETUPvSCREENCAUSESAWARNING
screen to appear.
Read the on-screen warning, then click Yes to continue.