36
Wireless DSL Gateway User Manual
The “7!.)0!DDRESSvSCREENAPPEARS
7!.)0!DDRESSALLOWSMANUALSETUPOFTHEIP address of the Gateway. To do this:
!
Note: Some DSL providers use PPPoE to establish communica-
tion with an end user. Other types of broadband Internet con-
nections (such as fixed point wireless) may use either $(#0or
static IP address. If unsure which connection is present, check
with Verizon before continuing.
1. Select “$(#0vORhPPPoEvDEPENDINGONTHETYPEOFCONNECTIONTHEISP uses.
If PPP !UTO#ONNECTISBEINGUSEDCLICKINTHEAPPROPRIATECHECKBOX
2. If using PPPoE was selected in step 1, enter the user name and password in the
appropriate text boxes.
3. Select the IP type. If “Single Static IP !DDRESSvwas selected, enter the IP
address in the “Single Static IPvTEXTBOX)Fh-ULTIPLE3TATICIP !DDRESSESvWAS
selected, enter the designated gateway IP address and subnet mask address in
THEh'ATEWAY!DDRESSvANDh3UBNET-ASKvTEXTBOXESRESPECTIVELY
To Next Page
Loading...
