Step 1: Setting up your wireless digital box
Connect the power supply for the wireless digital
box to an available power outlet near your TV.
Wait until the POWER light on the front of the
wireless digital box turns solid green.
Using your TV manufacturer's remote, turn on your TV
and select the appropriate input using the input or
source button on your remote. The input selected
should match the input that you plugged your HDMI
cable into for the previous step.
While the wireless digital box initializes,
insert the 2 AAA batteries included in your
kit into your Optik TV remote.
Using the HDMI cable included in your kit, connect the
wireless digital box to any available HDMI input on your TV.
If your TV doesn’t have an available HDMI input, you’ll need
to use Component Audio and Video cables (not included).
Make note of the HDMI or Component input that you
plugged your cable into (i.e. HDMI 1). This will be needed
for the next step.
2
OK
Pb Y AUDIO
OUT
VIDEO
OUT
HDMI OPTICAL POWER
Pr
NETWORK
2
1
3
4
© 2016 TELUS. 07/16
To Next Page
Loading...
