Need help?Do you have a question about the Active Design CAPS II and is the answer not in the manual?
General| Brand | Active Design |
|---|---|
| Model | CAPS II |
| Category | Medical Equipment |
| Language | English |
Explains identification of various parts of the seating system.
Details how to configure the seating system for optimal user positioning.
Instructions on how to remove and replace the headrest.
Steps for removing and replacing the footrests.
Guide on how to remove and adjust the pommel or kneeblock.
Explains the different types of harnesses and how to adjust them.
Step-by-step guide on how to safely remove the seat unit.
Instructions for attaching the seat unit to the wheelchair base.
Describes the Lynx backrest and its non-adjustable nature.
Explains the dynamic backrest, its components, and how to operate it.
Details how to use swingaway lateral supports for easier transfers.
How to identify if the seat depth is too short or too long.
How to identify if footrests are too high or too low.
How to identify correct and incorrect positioning of lateral supports.
Guide to identifying correct and incorrect adjustments for kneeblocks/pommels.
How to identify correct and incorrect lap strap adjustments.
How to identify correct and incorrect harness adjustments.
Explains how to identify correct and incorrect tray positioning.
Details how to identify correct and incorrect headrest positioning.
How to identify if the backrest is positioned too high or too low.
Guidance on checking user comfort and the seat's effectiveness.
Steps for securely attaching the seating system to the wheelchair.
Instructions for securing the entire wheelchair within a vehicle.
How to properly secure the user with seat belts and postural straps.
A checklist to ensure all safety steps are followed for transport.
Instructions for checking the condition of seat and back cushions.
Maintenance checks for harnesses, including signs of wear or damage.
Maintenance checks for lap straps, including signs of wear or damage.
Instructions for washing and maintaining the seating system covers.
Information on the seating system's compliance with medical device directives.
Details on fabric and foam testing standards for the seating system.
Information about the product warranty and responsibilities.
To Next Page