ActivO CT10 - Firmware Update; Wi-Fi Over-the-Air Update

Getting Started 10
User Guide
For Wi-Fi connections, see Page 36.
The firmware update may not be successful if the battery level is
too low. (A minimum battery level of 20% is required.)
Do not disconnect from the wireless network while downloading
the firmware update. Doing so may cause data corruption and/or
damage to the system.
If an error occurs or the notice in the Notification Panel disappears
during an update, download the Firmware update can be initiated
again through [Menu - Settings - Update - System].
Wi-Fi Update / OTA (Over-the-Air)
1. Connect to a wireless network.
2. When a new firmware version is available, the screen will
display a Firmware Update Guide window.
3. Select [Update] and choose the items for update.
4. Follow the on-screen directions to update the firmware.
Updating
Firmware