Need help?Do you have a question about the Actron 612 and is the answer not in the manual?
Adhere to safety measures, avoiding moving parts, hot surfaces, and ensuring proper ventilation.
Refer to vehicle manuals for specific tune-up procedures and manufacturer specifications.
Connect BLACK clip to battery negative/ground, GREEN clip to distributor/TACH terminal.
Use adapter in socket No.6, connect GREEN clip to spade terminal, BLACK to battery NEG.
Connect GREEN clip to TACH terminal or adapter for HEI systems; BLACK to battery NEG.
Connect GREEN clip to 'DEC'/'TACH' wire or use Ford adapter; BLACK clip to battery NEG.
Connect GREEN lead to ignition coil negative terminal; BLACK clip to battery NEG.
Lift distributor terminal, slide Ford adapter, connect GREEN clip; BLACK clip to battery NEG.
Adjust carburetor per manufacturer's manual; warm engine before adjustments.
Slide selector to RPM; double 8-cyl scale reading for 4-cyl engines.
Consult manual for idle speed/mixture screw locations and procedures; refer to engine decal.
Slide selector to DWELL; observe readings; compare to manufacturer's specifications.
Adjust dwell using Allen wrench on GM distributors or follow steps for other systems.
Dwell is not adjustable; check reading against manufacturer limits for diagnostic purposes.
Adhere to safety measures, avoiding moving parts, hot surfaces, and ensuring proper ventilation.
Refer to vehicle manuals for specific tune-up procedures and manufacturer specifications.
Connect BLACK clip to battery negative/ground, GREEN clip to distributor/TACH terminal.
Use adapter in socket No.6, connect GREEN clip to spade terminal, BLACK to battery NEG.
Connect GREEN clip to TACH terminal or adapter for HEI systems; BLACK to battery NEG.
Connect GREEN clip to 'DEC'/'TACH' wire or use Ford adapter; BLACK clip to battery NEG.
Connect GREEN lead to ignition coil negative terminal; BLACK clip to battery NEG.
Lift distributor terminal, slide Ford adapter, connect GREEN clip; BLACK clip to battery NEG.
Adjust carburetor per manufacturer's manual; warm engine before adjustments.
Slide selector to RPM; double 8-cyl scale reading for 4-cyl engines.
Consult manual for idle speed/mixture screw locations and procedures; refer to engine decal.
Slide selector to DWELL; observe readings; compare to manufacturer's specifications.
Adjust dwell using Allen wrench on GM distributors or follow steps for other systems.
Dwell is not adjustable; check reading against manufacturer limits for diagnostic purposes.
General| Brand | Actron |
|---|---|
| Model | 612 |
| Category | Measuring Instruments |
| Language | English |
To Next Page
