Actron CP7529 Digital

Need help?

Do you have a question about the Actron CP7529 Digital and is the answer not in the manual?

Summary

Safety Instructions

High Voltage and Tool Safety

Details on high voltage points in the ignition system and use of insulated tools.

Timing Light Hookup Procedure

Vehicle Preparation and Clamp Attachment

Procedures for turning off the vehicle and attaching the inductive pickup clamp to the #1 spark plug wire.

Battery Clip Connection Guidelines

Instructions for connecting RED and BLACK battery clips to negative ground or auxiliary systems.

Engine Marks and Cycle Mode Setup

Locating engine timing marks and setting the 2/4 cycle operation for digital timing lights.

Measuring Initial Timing

General Measurement Preparation

Preparation, starting the engine, and aiming the timing light at engine timing marks.

Initial Timing Measurement (Advance Light)

Initial Timing Measurement (Digital Light)

Setting Initial Timing

Initial Timing Adjustment (Inductive & Advance Lights)

Procedures for setting initial timing using inductive and advance timing lights via distributor adjustment.

Initial Timing Adjustment (Digital Light)

Adjusting the digital timing light display and aligning marks by turning the distributor.

Checking Centrifugal Advance

Centrifugal Advance Measurement (Inductive Light)

Centrifugal Advance Measurement (Advance Light)

Centrifugal Advance Measurement (Digital Light)

Measuring Vacuum Advance

Vacuum Advance Measurement (Inductive Light)

Vacuum Advance Measurement (Advance Light)

Vacuum Advance Measurement (Digital Light)

Troubleshooting and Care

Timing Light Flashes Randomly