ActronAir ADVANCE EVV17AS User Manual

ADVANCE
Split Ducted Unit - Indoor (R-32 Series)
Installation and Commissioning Guide
IMPORTANT NOTE:
Please read this manual carefully before installing or operating your air conditioning unit.
That’s better. That’s Actron.
Model Numbers
Single Fan Coil Split Fan Coil*
EVV13AS EAA13AS and EFV13AS
EVV15AS EAA15AS and EFV15AS
EVV17AS EAA17AS and EFV17AS
* Split fan coil has a separate coil and fan.

ActronAir ADVANCE EVV17AS Specifications

General

Brand	ActronAir
Model	ADVANCE EVV17AS
Category	Air Conditioner
Language	English

Summary

Safety Instructions

Electrical Hazard - High Voltage

Warning about risk of electrocution and necessary precautions when working with live electricity.

Capacitor Discharge Warning

Alert regarding dangerous residual voltages in EC motors and compressor drives after power isolation.

Rotating Fan Safety

Cautionary advice on ensuring fans are stopped before servicing to prevent injury.

Unit Components Overview

Unit Dimensions and Clearances

Service Area and Airflow Clearances

Installation Procedures

Condensate Drainage System

Ductwork Connections

Airflow Design Guidelines

Duct Static Pressure Specification

Duct Sizing Parameters

Return Air Grille Sizing

Unit Lifting Procedures

Forklift Unit Handling

Safety Drain Tray Installation

Zone Barrel Installation

Electrical Installation Procedures

Electrical Hazard Warnings

Critical safety warnings for handling live electrical supplies and static-sensitive devices.

Power Supply and Requirements

Details on confirming power supply compatibility and protection requirements.

Voltage Balance Check

System Wiring Diagram

Electrical Connection Details

Split Unit Wiring Diagram

Overview of electrical connections for split unit configurations.

Data Cable Shielding

Circuit Breaker and Cable Sizing

Wall Controller Configuration Options

Recommended Wiring Configuration

Alternate Wiring Configuration

Zoning Cable Lengths

Neo Zone Controller and Sensor Cables

LR7-1 / LR7-2 Controller Wiring

Wall Control Wiring Connections

LR7-1 and LC7-2 Wiring

Detailed wiring instructions for LR7-1 and LC7-2 wall controllers.

NEO Wall Control Wiring

Instructions for wiring NEO wall controllers, including hardwiring and RJ45 connections.

NEO Hard Wiring

NEO RJ45 Wiring

Optional Sensor Wiring: LM-RS-2

Optional Duct Sensor Wiring: AERSS

Indoor Unit Commissioning Guide

Self-Learn Mode Initiation (LR7-1/LC7-2)

Steps to initiate and perform the self-learn mode for LR7-1 or LC7-2 controllers.

NEO Wall Controller Self-Learn

Guidance on completing the self-learn process using the NEO wall controller.

Zone Commissioning Procedure

Automatic Zone Configuration

Manual Zone Detection

Maintenance Checklist