G
Gregory HuangAug 14, 2025
What to do if ActronAir Network Router displays fault code?
- AAlan CamposAug 14, 2025
If 'EXX' is displayed on the wall controller, record the digits following 'E' and contact your installer.
To Next PageTo Next PageWhat to do if ActronAir Network Router displays fault code?
If 'EXX' is displayed on the wall controller, record the digits following 'E' and contact your installer.
Why is ActronAir Network Router cooling or heating not sufficient?
Insufficient cooling or heating can occur if the return air filter is clogged with dust and dirt. Ensure the air inlet and outlet on the outdoor unit are not blocked. Also, the outside temperature being above or below the design conditions can affect performance.
Why is my ActronAir LM7 making noises?
Various noises can occur during operation: * A swishing or gurgling noise might be heard when heating or cooling starts or stops, caused by refrigerant flow. * A whooshing noise from the outdoor unit can occur during defrost as the refrigerant changes direction. * The outdoor unit may be louder than normal on start-up as the compressor reaches speed and pressure. * The compressor might generate more noise than usual during defrost operation.
General| Brand | ActronAir |
|---|---|
| Model | LM7 |
| Category | Network Router |
| Language | English |
