−−
You can also quickly set the time to
the nearest hour. Press the CLOCK
button, then press the RESET button.
If the displayed time is before the
half hour, it will reset back to the
previous hour. If the displayed time
is after the half hour, it will reset
forward to the next hour.
For example:
1:06 will reset to 1:00
1:52 will reset to 2:00
The compass shows your direction
of travel. It indicates eight directions.
Compass operation can be affected
by driving near power lines or
stations, across bridges, through
tunnels, over railroad crossings, past
large vehicles, or driving near large
objects that can cause a magnetic
disturbance.
It can also be affected by accessories
such as antennas and roof racks that
are mounted by magnets.
The compass may need to be
manually calibrated after exposure to
a strong magnetic field. If the
compassseemstobecontinually
showing the wrong direction and is
not self-calibrating, do the following.
NOTE:Youshoulddothisprocedure
in an open area, away from buildings,
power lines, and other vehicles.
The compass is self-calibrating. If
you see ‘‘ ’’ in the direction
display and ‘‘Calibrate’’ is blinking,
the compass is self-calibrating.
CONTINUED
Trip Computer
Instruments and Controls
Compass Operation
Compass Calibration
131
00/08/07 22:07:47 31S3V600_136
To Next Page
Loading...
Need help?
General
