Childrenuptoaboutone
year old should be restrained in a
rear-facing, reclining child seat. Only
a rear-facing seat provides the
proper support to protect an infant’s
head, neck, and back. See page
for additional information on
protecting infants.
The following pages give general
guidelines for selecting and installing
child seats for infants and small
children.
To provide proper protection, a child
seat should meet three
requirements:
The child seat should
meet Federal Motor Vehicle
Safety Standard 213 (FMVSS 213)
or Canadian Motor Vehicle Safety
Standard 213 (CMVSS 213). Look
for the manufacturer’s statement
of compliance on the box and seat.
Leaving children without
adult supervision is illegal in most
states and Canadian provinces,
and can be very hazardous. For
example, infants and small
childrenleftinavehicleonahot
day can die from heatstroke. And
children left alone with the key in
the ignition can accidentally set
the vehicle in motion, possibly
injuring themselves or others.
30
CONTINUED
Infants:
Selecting a Child Seat
The child seat should meet safety
standards.
The child seat should be of the
proper type and size to fit the child.
Do not leave children alone in your
vehicle.
1.
2.
General Guidelines for Using
Child Seats
Protecting Children
Driver and Passenger Safety
25
00/08/07 21:51:01 31S3V600_030
To Next Page
Loading...
Need help?
General
