Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
To remove the front turn signal
bulb, push it in slightly and turn it
counterclockwise. To remove the
side marker bulb, pull it straight
out of its socket.
Testthelightstomakesurethe
new bulb is working.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Install the new bulb into the
socket.
Push the electrical connector onto
the new bulb.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Turn on the headlights to test the
new bulb.
1.
2.
3.
4.
5.
4.
5.
6.
Replacing Front Turn Signal/
Parking and Side Marker Light
Bulbs
Lights
Maintenance
342
TAB
To Next Page
Loading...
