Acura 2003 MDX - Page 347

Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Your car uses halogen fog light
bulbs. See page for information
on replacing a halogen bulb.
Remove the electrical connector
fromthebulbbysqueezingthe
connector to unlock the tab, then
slide the connector off the bulb.
Push the electrical connector onto
the new bulb.
Use a wrench to loosen the light
assembly’s mounting bolt.
Remove the light assembly from
the bumper.
1.
2.
3.
4.
5.
341
CONTINUED
ReplacingaFogLightBulb
Lights
Maintenance
343
BOLT
CONNECTOR