Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
Reset the fastener by pushing on
the pointed end until it pops back
almost flush with the fingers on
the housing.
Put the fastener in the hole in the
side of the trunk lining and push
on the center until it locks (the
center is flush with the head).
Reinstall the socket. Turn it
clockwise until it locks.
Install the new bulb in the socket.
Remove the bulb by pushing it in
slightly and turning it counter-
clockwise.
Testthelightstomakesurethe
new bulb is working.
1.
2.
8.
9.
3.
4.
Replacing a High-mount Brake
Light Bulb
Lights
Maintenance
293
To Next Page
Loading...
