▲▼
▲▼
The system message will appear
again by pressing the INFO ( / )
button after cancel it.
You will also see the system
message every time you turn the
ignition switch to the ON (II)
position until your vehicle have the
indicated maintenance performed by
your dealer.
Negative mileage means your
vehicle has passed the maintenance
required point.
If the indicated maintenance is not
performed, you will see a " SERVICE
PAST DUE" message along with the
maintenance item code(s), and the
negative mileage will be also
displayed. The negative mileage
continues to display after the vehicle
has been driven 10 miles (10 km) or
more.
To cancel the system message, press
and release the INFO ( / ) button
on the steering wheel. At this time,
the system message indicator will
be turned off. Then the display
will change to the engine oil life
display. You will see the negative
mileage blinking and a ‘‘SERVICE’’
message along with the maintenance
item code(s) on the multi-
information display.
Immediately have the service
performed, and make sure to reset
the display as described on the
following.
Maintenance Minder
not
Maintenance
339
U.S.U.S.
Canada Canada
０６／０５／１９ １５：０２：１２ ３１ＳＴＫ６００ ０３４４
To Next Page
Loading...
