▲▼
▲▼
With the multi-information display
and the INFO ( / ) and SEL/
RESET buttons on the right side of
the steering wheel, you can
customize some vehicle control
settings.
To enter the customizing mode,
press and hold the INFO ( / )
button for more than 3 seconds.
To change the settings, the ignition
switch must be in the ON (II)
position, and the vehicle must be
stopped with the transmission in
Park.
You cannot customize the settings
under these conditions:
If you turn the ignition switch to
the ACCESSORY (I) or the LOCK
(0) position.
If you move the shift lever out of
Park.
If you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page .
Refer to the table in the next page
about the settings you want to
customize.
The first customizing menu is:
CHG SETTING
DEFAULT ALL
If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button (see page ).
90
91
CONTINUED
Customized Settings
Multi-Information Display
Instruments and Controls
87
０６／０５／１９ １４：２９：５０ ３１ＳＴＫ６００ ００９２
To Next Page
Loading...
