▼▲
▼▲
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
thetotalmileageaftertheremaining
oillifebecame0%,andthe
maintenance item code(s).
This message is displayed when you
drive over 10 miles (for U.S. models)
or 10 km (for Canadian models)
after seeing the 0% message.
Immediately have the service
performed, and make sure to reset
the display as previously described.
The message will be canceled if the
or buttononthesteeringwheel
is pressed. Press the or button
to see the message again.
When you press the SEL/RESET
button to select the engine oil life,
the message ‘‘SERVICE’’, along with
the maintenance item code and the
total negative mileage after the oil
life became 0 %, will be displayed on
the lower part of the multi-
information display.
Maintenance Minder
386
MAINTENANCE CODE
CANADA
U.S.
TOTAL PAST DUE MILEAGE
TOTAL PAST DUE MILEAGE
U.S.
CANADA
０７／０７／０９ １０：１４：４５ ３１ＳＴＸ６１０ ０３９１
To Next Page
Loading...
Need help?
General
