▲▼
All the maintenance items displayed
in the multi-information display are
in code.
For an explanation of the
maintenance codes, see page .
Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the display the
next time you turn the ignition
switch to the ON (II) position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:
Turn the ignition switch to the ON
(II) position.
If the engine oil life is not
displayed, press the SEL/RESET
buttononthesteeringwheel
repeatedly the multi-information
tire pressure.
Select ‘‘RESET’’ by pressing the
INFO ( / ) button, then press
the SEL/RESET button to reset
the engine oil life display. The
maintenance item code(s) will
disappear, and the engine oil life
will reset to ‘‘100.’’ If you want to
cancel the oil life reset mode,
select ‘‘CANCEL.’’
Press and hold the SEL/RESET
button on the steering wheel for
more than 10 seconds. The
remaining engine oil life reset
mode will be shown on the multi-
information display.
1.
2.
3.
4.
390
Maintenance Minder
Maintenance Main Items and Sub
Items
Resetting the Engine Oil Life
Display
Maintenance
387
MAINTENANCE
MAIN ITEM
MAINTENANCE
MAIN ITEM
MAINTENANCE
SUB ITEMS
MAINTENANCE
SUB ITEMS
０７／０７／０９ １０：１４：５６ ３１ＳＴＸ６１０ ０３９２
display shows blank, SH-AWD
®
and
To Next Page
Loading...
Need help?
General
