CONTINUED
Remove the bolt and use the flat-
tip screwdriver to remove the
holding clips located under the
front bumper.
Push down the inner fender.
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
1.
2.
Lights
Replacing Front Fog/Daytime
Running Light Bulbs
Maintenance
405
SIDE MARKER LIGHT
BOLT
HOLDING
CLIPS
BULB
SOCKET
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the
glass can cause the bulb to overheat
and shatter.
０７／０７／０９ １０：１７：１９ ３１ＳＴＸ６１０ ０４１０
To Next Page
Loading...
