＋
CONTINUED
When you are in sequential shift
mode, and the vehicle is stopped,
pull the (right) paddle shifter to
shift to second gear. You will see
‘‘M2’’ in the display. Starting in
second gear helps to reduce
wheelspin in deep snow or on a
slippery surface.
The super handling-all wheel drive
(SH-AWD) system is a full time all-
wheel-drive system that
automatically controls and transfers
varying amounts of engine torque to
all wheels independently, according
to the driving conditions.
While the SH-AWD system helps to
enhance the vehicle’s driving
stability in all situations, it is still
your responsibility to drive and
corner at reasonable speeds and to
leave a sufficient margin of safety. The SH-AWD torque distribution
monitor on the multi-information
display shows you the amount of
torque being sent to the wheels.
Each wheel: right front (RF), left
front(LF),rightrear(RR),andleft
rear (LR), has its own torque
indicator.
SH-AWD Torque Distribution
Monitor
Super Handling-All Wheel Drive
(SH-AWD )System
Driving with the Paddle Shifters, Super Handling-All Wheel Drive (SH-AWD )System
Driving
Starting in Second Gear
301
TORQUE INDICATOR
TORQUE INDICATOR
TM
TM
０８／０４／１１ １８：４３：０３ ３１ＳＴＫ６２０ ０３０６
To Next Page
Loading...
