Indicator Name On/Blinking Explanation Message
Blind Spot
Information (BSI)
Indicator
*
●
Comes on for a few seconds when
you change the power mode to ON,
then goes off.
●
Stays on while BSI is turned off.
—
●
Comes on when mud, snow, or ice
accumulates in the vicinity of sensor.
●
Comes on while driving - Remove
the obstacle in the vicinity of sensor.
2 Blind Spot Information (BSI)
System
*
P. 379
●
Comes on if there is a problem with
the system.
●
Comes on while driving - Have the
vehicle checked by a dealer.
Collision
Mitigation Brake
System
TM
(CMBS
TM
)
Indicator
*
●
Comes on for a few seconds when
you change the power mode to ON,
then goes off.
●
Comes on when you deactivate the
CMBS
TM
. A multi-information display
message appears for five seconds.
●
Comes on if there is a problem with
the CMBS
TM
.
●
Stays on constantly without the
CMBS
TM
off - Have the vehicle checked
by a dealer.
2 Collision Mitigation Braking
System
TM
(CMBS
TM
)
*
P. 392
To Next Page
Loading...
Need help?
General
