Indicator Name On/Blinking Explanation Message
Collision
Mitigation
Braking System
TM
(CMBS
TM
)
Indicator
*
●
Comes on when the CMBS
TM
system
shuts itself off.
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.
2 Front Sensor Camera
*
P. 351
●
When the radar sensor gets dirty, stop your
vehicle in a safe place, and wipe off dirt
using a soft cloth.
●
Have your vehicle checked by a dealer if the
message does not disappear even after you
clean the sensor cover.
2 Collision Mitigation Braking System
TM
(CMBS
TM
)
*
P. 404
●
Stays on - The temperature inside the
camera is too high. Use the climate control
system to cool down the camera. The
system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera
*
P. 351
To Next Page
Loading...
Need help?
General
