uuAudio System Basic OperationuPlaying AM/FM Radio
256
■
Radio frequency manual tune screen
1. Select Tune.
2. Enter the desired radio frequency using the
numeric keypad.
3. Select OK to tune into the frequency.
You can also tune into the radio frequency of
your choice following the procedures below
instead of inputting its frequency value.
1. Touch the desired frequency value on the
frequency bar.
2. Select and hold the frequency indicator,
then slide it to the desired frequency value
on the frequency bar.
■
Radio text
Display the radio text information of the selected RDS station.
1. Select Audio Menu.
2. Select Radio Text.
■
Scan
Samples each of the strongest stations on the selected band for 10 seconds.
Select SCAN.
To turn off scan, select Stop Scan.
1Radio frequency manual tune screen
You can tune the range of FM frequency between
87.7 to 107.9MHz and range of AM frequency
between 530 to 1710kHz.
Tune icons:
Select or to tune the radio frequency.
Seek icons:
Select or to search the selected band up
or down for a station with a strong signal.
Frequency
Indicator
Frequency Bar
Numeric Keypad
1Radio text
The text indicator comes on when you received a text
message. The indicator stays on until you read the
message.
The radio text information is not updated
automatically. If you want to display the latest
information, return to the previous screen and select
Radio Text again.
20 ACURA MDX-31TZ56600.book 256 ページ ２０１９年４月２４日 水曜日 午後５時４４分
To Next Page
Loading...
