▲▼
−
−
Wiper Action
You can select from two settings
when the wiper switch is in the INT
position.
To exit this mode without changing
the current settings, select EXIT,
and press the SEL/RESET button.
Select the desired mode by pressing
the or button, and enter your
selection by pressing the SEL/
RESET button.
WITH VEH SPD
The wiper intermittent operation
changes with vehicle speed.
INTERMITTENT
The wiper intermittent operation
varies according to the time selected
on the wiper lever.
The confirmation screen is shown
for 2 seconds, then the CUSTOMIZE
ENTRY screen returns.
Multi-Information Display
100
To Next Page
Loading...
