Acura TSX 2012 User Manual

Continued
251
uuReplacing Light BulbsuFog Light Bulbs
Maintenance
4. Unhook the hook, and pull out the
connector.
5. Remove the old bulb and insert the new
bulb.
6. Put the connector back into the headlight
assembly.
Fog Light Bulbs
When replacing, use the following bulbs.
1. Remove the clip using a flat-tip screwdriver,
and lower the under cover.
1Low Beam Headlights
Insert the clip with the central pin raised, and push
until it is flat.
Push until the
pin is flat
Hook
Bulb
Connector
Fog Light: 55 W
1Fog Light Bulbs
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Clip
Under Cover
Main Menu
Table Of Contents

Acura TSX 2012 Specifications

General

Brand	Acura
Model	TSX 2012
Category	Automobile
Language	English