Preferences
You can set how reading units are displayed in the Data Transfer CSV file and set reading calibrations. When sensor
placement or an environmental factor may impact readings, setting a reading calibration can improve accuracy and
barometric pressure can be adjusted for altitude. Calibrated readings and pressure adjustments are shared with My
AcuRite and Weather Underground and stored in the Data Transfer CSV file.
Weather Sharing
You can set up PC Connect to share the readings collected by your 5-in-1 Weather Station with My AcuRite and
Weather Underground. From My AcuRite, you can view and monitor your conditions online at anytime from the
My AcuRite mobile app.
To share with Weather Underground, you must have a My AcuRite account and set up sharing to My AcuRite, then
register your AcuRite Weather Station (Personal Weather Station) with Weather Underground to obtain a Station ID
and Password (Station Key).
Always-on Connection
To ensure continuous sharing with My AcuRite and Weather Underground and to allow scheduled Data Transfers, the
PC Connect software must be open on your computer and your computer must be on and have an internet connection
at all times. The PC Connect software can be minimized.
To prevent your computer entering sleep mode, it's recommend to enable the Always-on Connection setting.
Set up PC Connect
Installing the PC Connect software is simple, and once installed you can store and share
readings collected by your 5-in-1 Weather Station.
To Next Page
Loading...
