How to manually transfer data to PC Connect
1. Open the PC Connect software.
2. From the Data Transfer section, select Transfer Now.
3. Select where to save the CSV file.
The data transfer process starts automatically and a notification message appears when complete.
4. Once complete, select Close.
How to set up scheduled data transfers
1. Open the PC Connect software.
2. From the Data Transfer section, select the check box Schedule automatic data transfers.
3. Set the schedule settings.
How often would you like data to transfer?
Select the frequency that readings stored in the Indoor Display are to be transferred to the CSV file. These readings
are stored in 12-minute intervals, and can be set to transfer every 12 minutes, 30 minutes, 1 hour, 6 hours, 24
hours, 7 days or every 12 days.
How would you like each data transfer saved?
l New dated file - creates a new timestamped file each time data is transferred.
l Append to a single file - continuously adds new data transfers to a single, cumulative file.
4. By default files are saved to the location set during the installation of PC Connect. To save the file to a new
location, select Choose Location.
To Next Page
Loading...
