ACV BMR 33 - Default Chapter; Table of Contents

EN • 2
ENGLISHFRANCAISNEDERLANDSESpAñoLITALIANoDEuTSCH
662Y0500 • B
INDEX
SAFETY PRECAUTIONS 3
STANDARDS AND REGULATIONS 3
Standards and directives 3
Exhaust gas system and effective heat requirement 3
Nozzle selection 3
GENERAL 4
The flame makes the difference 4
Energy saving 4
The mixing unit and recirculation principle 4
INSTALLATION 5
Specification 5
Dimensions 6
Recirculation 6
Installation instructions 6
System check 6
Burner assembly 6
Special applications 6
COMMISSIONING 7
Commissioning and Adjustment 7
Pump pressure adjustment 7
Changing the burner capacity 7
Fan compression 7
Air intake nozzle adjustment 8
Air intake nozzle 8
Air circulation 8
VIEWS, GASKET 8
MAINTENANCE 9
Maintenance 9
Flame monitoring 9
TROUBLESHOOTING 10
Fault causes and solutions 10
TECHNICAL DOCUMENTATION 12
Technical data and electrical supply 12
Output table 12
Oil line dimensions 12
BMR 33 wiring diagram 12
BMR 33 operating range 13
Dimensions 13
Guarantee 13
Oil tank and oil lines 13
Spare parts 13
SPARE PARTS WWW.ACV.COM
DECLARATION OF CONFORMITY 8/1/2004 - BE
We hereby declare that the following appliance series complies
with the type described in the EC Declaration of Conformity and
that it is manufactured and placed on the market in conformity
with the requirements of the declaration of conformity of
8January 2004.
Model: BMR 33
Product type with: Forced draught oil burner
Inspection authority: TÜV Rheinland
Product ID number: CE 0035BS107
Measured values: NOx : 84 mg/kWh
CO : 3 mg/kWh
Certified quality system ISO 9001