MEASUREMENT FOUNDATION
12
Servo
ROTARY 400 HV
INSTRUMENTS
Using the Remote Control
The laser can be operated by an infra-red remote control. The remote control will
only work if there is an uninterrupted line of sight between the infra-red control and
the remote control sensor on the control panel.The effective range of the remote
control is 20m. The Remote Signal Indicator ashes when a signal has been sent.
7. Care and Maintenance
Preventative Maintenance
• Store in a clean dry place, between -15°C..+55°C.
• Before moving or transporting the unit, ensure that it is turned off/locked.
• If the instrument is wet, dry off with a dry cloth. Do not seal the laser in the carrying
case until completely dry.
• Do not attempt to dry the instrument with re or with an electric dryer.
• Do not drop the instrument, avoid rough treatment, and avoid con stant vibration.
• Periodically check the calibration of the instrument.
• Clean with a soft cloth, slightly dampened with a soap and water solution. Do not
use harsh chemicals, cleaning solvents or strong detergents.
• Keep the laser aperture clean by wiping it gently with a soft lintfree cloth.
• Keep the detection window of the Laser Detector clean by wiping it with a soft
cloth moistened with glass cleaner.
• Remove batteries from the instrument during lengthy periods of non-use, and
store in carrying case.
• Ensure that the instrument is turned off before removing batteries.
INST RUME NTS
2
3
4
5
1
6
1. Remote Signal Indicator
2. Scan Mode/Scan Width
3. Clockwise Rotation Key
4. Counterclockwise Rotation Key
5. Speed Key/Stop Key
6. Auto/Manual Key
To Next Page
Loading...