Downloads
Datasheets
Datasheet for the onboard regulator used (MIC5225 3.3V and 5.0V)
mic5225.pdf
http://adafru.it/cE4
Webpage for the ATtiny85, the microcontroller used in the Trinket (http://adafru.it/cE5)
Source code
Original code for the Trinket/Gemma bootloader on github (http://adafru.it/cE6)
We do not offer any support for this code, it is released as-is!
Schematics
Trinket 3.3V Schematic:
Please note: you cannot use the Adafruit USB VID/PID for your own non-Trinket/Gemma
products or projects. Purchase a USB VID for yourself at
http://www.usb.org/developers/vendor/
To Next Page
