Need help?Do you have a question about the Adam A8X and is the answer not in the manual?
General| Frequency Response | 38 Hz - 50 kHz |
|---|---|
| Amplifier Power Tweeter | 50 W |
| Type | Active Studio Monitor |
| Input Connectors | XLR |
| Input Impedance | 10 kΩ |
| Tweeter Type | X-ART tweeter |
| Amplifier Power Woofer | 150 W (RMS) |
Key information for setting up the loudspeaker system before initial operation.
Step-by-step guide for connecting and operating the loudspeakers.
Instructions for positioning the monitor vertically on a surface or stand.
Guidance for placing the monitor horizontally, ensuring mirrored symmetry.
Optimal positioning of the tweeter at ear level for accurate sound reproduction.
Setting up for stereo applications using an equilateral triangle configuration.
Positioning speakers for multi-channel surround sound based on ITU recommendations.
Overview of rear panel controls for fine-tuning acoustics and preferences.
Explanation of the 'Tweeter Level' control and its effect on high frequencies.
Details on 'High Shelf' and 'Low Shelf' controls for adjusting room EQ.
Diagnosing issues with no or distorted audio signal despite normal LED indication.
Identifying and resolving parasitic noises such as humming or cracking.
Details of the five-year limited warranty, coverage, and exclusions.
Procedure for initiating warranty repairs and contacting dealers.
To Next Page
